DINITROL
3125HS 500ML AEROSOL RUST PROOFING CAVITY WAX

 

High
solids corrosion prevention for cavities & open surfaces.

 

You are
purchasing 1 x 500ml aerosol

 

Product
Description

Brown
vehicle underbody chassis coating. The non dripping solvent based brown
underbody coating rust preventative is specially formulated, with a high dry
matter content. This minimises environmental pollution and occupational
exposure during on-line application. The product can be applied with an
underbody coating gun.

 

Characteristics

Brown

High
Solids

Tack-free

Long term
– permanent

Low
temperature resistant

Drip
resistant

Cavity
wax protection

Applications

 

DINITROL
3125 HS is a solvent borne rust preventative specially formulated, with a high
dry matter content, to minimise environmental pollution and occupational
exposure during on-line application. Main properties are as follows:

High dry
matter content

Good film
building properties

No
dripping

 

DINITROL
3125 HS is designed for application mainly as a cavity protection and a thin
underbody coating. Main objects to be treated are used vehicles with some
corrosion present. For improved performance on more corroded surfaces, DINITROL
ML or DINITROL ML HS can be used as a pre-treatment. The slightly thixotropic
nature of the product ensures an evenly applied film to the required thickness
and strength.

Method of
Use

 

DINITROL
3125 HS may be applied by spraying with manual, semi or fully automatic
equipment and is suitable for airless spraying on to a clean dry surface.

 

Specifications

Type of
film: waxy

Specific
Gravity: 980 kg/m³

Non-volatile
content: 68%

Viscosity
(DIN 4): 55 seconds

Flash
point: 41°C

Recommended
film thickness wet: 80 µm

Recommended
layer thickness: 30 µm

Drying
time: 2 hrs

Low
temperature adhesion: – 30°C

Effect on
car paint: None

Removability:
Hydrocarbon solvents

Heat
resistance: > 120°C at 50 µm

 

PART NUMBER – DA1991